When a furnace stops working on a February night or an AC unit runs all afternoon without cooling the house down, the call needs to go somewhere that picks up and can talk through the problem. We cover Lisbon Falls for the full range of heating and cooling work: furnace repair and replacement, heat pump installation and service, AC repair, ductwork, thermostats, indoor air quality, and seasonal maintenance. The rate is confirmed on the phone before anything is scheduled, and we are available any hour of the day or night, every day of the year.
Homes in a town this size tend to run older equipment, and that equipment carries a history. A furnace that has handled fifteen or twenty winters may still have years left in it, or it may be one cold snap away from a no-heat call. We work through what the system actually needs rather than assuming the answer before the visit starts.
Call (207) 548-5534 and tell us what is happening.
Filtration and humidity are easy to overlook until they become obvious. A forced-air heating system running through a long regional winter pulls moisture out of the indoor air as a side effect of the heat it delivers. The result is dry skin, static electricity, and respiratory irritation that builds through the season. A whole-home humidifier connects to the air handler and conditions all supply air as it moves through the system, which is a different result from a portable unit running in one room.
Air filtration works on a different problem. Standard filters catch larger particles but leave finer ones circulating through the ductwork and back into the living space. A whole-home filtration upgrade or UV air purifier installation integrates with the existing equipment and treats air at the system level. The scope of either installation is confirmed on the call before anything is booked.
A room that stays cold in winter or warm in summer when the rest of the house is fine is telling you something about the system behind the walls. The cause is almost always in the distribution rather than the equipment itself. Duct leaks at joints and connections bleed conditioned air into unconditioned spaces before it reaches the room it was supposed to serve. Blockages restrict airflow to specific branches of the system without affecting others.
A ductwork inspection looks for where the losses are happening before any repair is recommended. Gaps at connections, separations at joints, and sections of duct that were never properly secured are the most common findings in older housing. Sealing those points returns conditioned air to the rooms it belongs in and reduces the load on the equipment at the same time.
If the ductwork is sound but temperatures still vary significantly between rooms, the issue may be in how the system is controlled. A zoning system divides the house into independently controlled areas, each with its own thermostat, so a bedroom at one end of the house does not have to share a set point with a living room at the other. Smart-control and thermostat installation can also change how the system behaves across the day without any changes to the equipment itself.
A no-heat call in the middle of a Maine winter is not a situation that waits for a weekday morning. We take emergency calls any hour, any day, including nights, weekends, and holidays. There are no after-hours restrictions here, because there are no closed hours.
When the furnace is down or the heat pump has stopped producing heat, call (207) 548-5534 and describe what the system is doing.
For scheduled work, the visit is arranged on the call. If the property has tenants or a business operating in it, mention that when you call and we will work out the details before anything is booked. Some jobs require access to the air handler, the furnace, or interior registers, and coordinating around an occupied space is a normal part of how the work gets arranged.
We keep you informed from diagnosis to final test, so the outcome is clear before the visit closes.
Banging, squealing, and rattling are not normal operating sounds, and each one points in a different direction. Banging from an air handler or furnace often means something in the blower assembly is loose or failing. Squealing typically comes from a motor bearing or belt that is worn. Rattling can be a loose panel, debris in the outdoor unit, or vibration in the ductwork. A diagnostic visit identifies the source before anything is replaced.
A refrigerant leak shows up as a system that runs but cannot reach the set temperature, or ice forming on the evaporator coil. Low refrigerant charge is not a normal wear item that gets topped off on a schedule. It means there is a leak somewhere in the circuit, and finding it is part of the repair. The system is tested after the repair to confirm the charge is correct and the leak is resolved.
Cold-climate heat pumps rated to operate well below freezing have changed the calculation for homeowners in this region considering an upgrade. A single system handles both heating and cooling, which simplifies the equipment side of the house. Mini-split configurations work particularly well in homes without existing ductwork, and multi-zone setups let different rooms run at different temperatures. Installation involves load calculation and equipment sizing before anything is committed, and the scope is confirmed on the call.
A vent that produces little or no airflow while the system is running points to a restriction somewhere between the equipment and the register. A clogged filter is the simplest explanation and the first thing to check. Beyond that, a blocked duct, a failed blower motor, or a disconnected duct section are the next most common causes. A visit covers the full airflow path from the air handler to the affected registers.
This is one of the more common calls we get from older homes in the area. The system may be working correctly at the equipment level while still failing to distribute heat or cooling evenly. Duct leaks, undersized branch runs, and dampers stuck in the wrong position are the usual culprits. Evaporator coil cleaning can also affect how evenly the system performs if the coil is fouled enough to restrict airflow through the air handler.
An AC that runs continuously without bringing the temperature down is working harder than it should for a result it is not delivering. Common causes include a fouled condenser coil that cannot reject heat, low refrigerant charge, or a compressor that is losing capacity. In some cases the system is simply undersized for the space it is conditioning, which is a different problem with a different answer. A diagnostic visit works through each of those possibilities before a repair or replacement is recommended.
The rate for a service call is confirmed on the phone before anything is scheduled. What moves a quote is what the system actually needs: the fault that turns up during diagnosis, what has to be accessed to reach it, and whether a repair is the right answer or whether the equipment has reached the point where replacement makes more sense. None of those are knowable before the visit, which is why the price is confirmed after the scope is understood rather than before it is.
A second opinion on a replacement quote is a fair thing to ask for. If another company has told you a system needs to be replaced, call us and we will assess it and tell you what we find. The goal is an honest answer about what the equipment needs, not a predetermined outcome.
Describing pricing as clear and explained up front is accurate. Promising what the final number will be before the job is scoped is not something this page is in a position to do.
Call (207) 548-5534, describe the system and what it is doing, and we will give you a rate for the visit before anything is booked.
We serve Lisbon Falls and the surrounding towns across Androscoggin County. That includes Lisbon, Durham, Bowdoin, Topsham, and Bowdoinham. Residential homes, rental properties, and commercial buildings across the area are all part of the work we handle. If you are not sure whether your address falls in the coverage area, call and ask. We will confirm it on the call. To see how it all fits together, read our services page.
A diagnostic visit covers a systematic check of the system components relevant to the symptom you described. That includes controls, airflow, refrigerant charge where applicable, and the mechanical components most likely to cause the problem. Most diagnostic visits take between one and two hours, though more complex systems or less obvious faults can take longer.
Forced-air furnaces running on gas or propane are the most common setup in this part of Maine, and we work on all of them. We also service boilers and hydronic heating systems, heat pumps, and ductless mini-splits. If you are not sure what type of system you have, describe what you see when you call and we can usually identify it from the description.
After a repair, the person who did the work explains what caused the failure and whether there is anything on the maintenance side that would reduce the risk of a repeat. That might be a filter change schedule, a coil cleaning recommendation, or a note about a related component that is showing early wear. The goal is to give you useful information, not a list of additional services.
Mention that the property is tenant-occupied when you call and we will work out access and timing before the visit is booked. Most interior heating and cooling work requires someone to be present or to provide access to the equipment. We can coordinate around a tenant's schedule when that is discussed on the call before anything is confirmed.
A whole-home humidifier connects to the existing air handler and ductwork, so it does not require a new furnace or a separate system. The installation is scoped on the call based on the existing setup, and the rate is confirmed before the visit is scheduled. This is an air-side installation and does not involve the domestic water lines or any plumbing work.
A property with no heat in a Maine winter and a property with no cooling in summer both need attention the same day. We answer any hour and take the call through the same number regardless of the day or time.
Call (207) 548-5534 and tell us what the system is doing.
We will talk through the symptoms, confirm the rate, and get someone out as quickly as the schedule allows.
Check our full list of areas. Heating and cooling work in the surrounding towns: Lisbon, Durham, Topsham.
We cover the full range of residential and commercial heating and cooling work in Lisbon Falls and across Androscoggin County. Whether the call is for a routine tune-up, an emergency no-heat situation in January, or a full system replacement, the scope and the price are confirmed before anything is scheduled. The table below lays out what each service covers, who it fits best, and what is worth knowing before you call. Reach out and we will talk through what the system needs.
| Service | What the Service Includes | Best For | Helpful Details |
|---|---|---|---|
| Emergency HVAC Service | 24/7 availability including holidaysPhone diagnosis and symptom reviewPrice confirmed before dispatchSame process at 2 a.m. as midday | Any no-heat or no-cool situation that cannot wait, any hour of the day or night | There are no closed hours. A call at midnight on a Sunday is handled the same way as a Tuesday afternoon call. Describe what the system is doing and we confirm the rate before anything is scheduled. |
| Ductwork Repair & Sealing | Duct inspection and leak locationJoint and connection sealingAirflow testingEfficiency assessment | Homes with uneven room temperatures or a forced-air system that is not delivering to all areas | Older Lisbon Falls homes with original ductwork often have gaps at joints that have opened over time. Sealing those points brings more conditioned air to the rooms it is supposed to reach. |
| HVAC System Installation & Replacement | Load calculation and equipment sizingFull system installationDuctwork compatibility assessmentSystem commissioning and test | Homeowners replacing aging equipment or upgrading to a more efficient system | When repair costs stack up or a system can no longer reach set temperature, a replacement conversation covers sizing, what the installation involves, and what the new system handles differently. |
Call (207) 548-5534 and tell us what the system is doing. We will confirm the rate and what the visit covers before anything is scheduled.
(207) 548-5534